Sepilite Fiber Sepiolite Velvet Composite Fiber for Brake Lining Friction Material

• Customization: Available
• After-sales Service: by Free
• Warranty: Two Years Ago
• Model NO.: SF-1040, SF-2040, SF-1030 SF-1060
• Type: Brake Lining
• Material: Non-Asbestos
• Position: Front
• Certification: ISO/TS16949, ISO9001, GMP
• Classification: Disc
• Drum Brakes Classification: Brake Shoe
• Main Market: South America, North America, Africa, Western Europe, Eastern Asia, Oceania, Southern Europe, South Asia
• Sio2: 58.73 %
• MGO: 26.26 %
• H2O: 17.61 %
• P H Value: 7-8
• Compression Strength: >300kpa
• Dry Powder Density: <360kg/M3
• Cohesional Strength: >50kpa
• Thermal Conductivity: <0.051W/M.K
• Transport Package: PP Paper Bags on Pallets
• Specification: SF-1030, SF-1040, SF-2040, SF-20M
• Trademark: Deyoute
• Origin: Hebei, China
• HS Code: 2530909999
• Production Capacity: 6500

Product Description

Technical Information Sheet

1. General

     Sepiolite Fiber  has good adsorption, decolorization, thermal stability, corrosion
resistance, radiation resistance, heat insulation insulation, friction resistance, permeability and
other properties
       Size:325Mesh,200mesh,20mesh,1-3mm,1-4mm,2-4mm,1-7mm,2-8mm,1-10mm

      2. Properties

Chemical Formula:		Mg4Si6O15(OH)2·6(H2O)
Composition:		Molecular Weight = 613.82 gm
Magnesium Mg	15.84 %	MgO	26.26 %
Silicon Si	27.45 %	( SiO2)	58.73 %
Hydrogen  H	1.97 %	(H2O)	17.61 %
Oxygen O	54.74 %	P H Value	7-8
Fiber length:	1-3mm	Compression strength	>300kPa
Dry Powder Density:	≤360kg/m3	Cohesional Strength	≥50kpa
Thermal Conductivity	≤0.051w/m.k	Asbestos Content	0

 

3. Application

    Sepiolite Fiber  for making friction materials,drilling, petroleum, medicine, brewing, building materials, pesticides, fertilizers, rubber products, and other aspects. Brake linings made from our fiber products have many notable features such as stably ,high temperature properties,little abrasion,low(no)noise and long life.when we add in<2% of above fiber into asphalt materials,it will produce multi performance properties including prevent "drain down "problem,improve internal reinforcement &crack resistance ,cost effect replacement for asbestos fiber and others.

Non-Asbestos Composite Mineral Synthetic Fibre(Composite Fiber)
Product Model: CF-1035,CF-1025

The fiber is made of mineral fiber, organic fiber and surface treatment agent. Length 1.0-3.5mm, the fiber has good dispersion, suitable for mixing with all kinds of mixer. Using this product cold type effect is good, especially suitable for cold type two step brake lining production process, use this product do not need to add organic fiber.

Technical Indicators:

Project	Indicators
Specific Gravity	2.25g/cm³
Fiber length	1.0-3.5mm
Loose density	800-1100 cm³/100g
105ºC Volatiles	<2.5%
Slag ball Content	>120mesh; < 2%
800ºC Burn loss	28-32%
Fiber diameter	3-8μm
P H	8-10
Main ingredients	Mineral Fiber 70% Cellulose Fiber 30%

4.Package
     25kg*40tons packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .

 

 

5.Storage

 Sepiolite Fiber  must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.

1. Industrial Safety and Environment Protection

1.  Risk of explosion by static sparks or ignition sources
2.  Use only explosion -proof equipment .
3.  Use with local exhaust ventilation.
4.  Wear protective eyeglasses or chemical safety goggles .

1. A safety data sheet will be made available on request

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale