Professional Supplier Potassium Titanate Whisker for Manufacturing Brake Lining

Product Description

                                                   POTASSIUM TITANATE WHISKER
                                                                                                Technical Information Sheet
Potassium Titanate Whisker & Titanate Wafer Crystal
   

                                                                    
1.General
    Potassium titanate whiskers is a new type of composite material, with excellent heat insulation, wear resistance and impact resistance, the material has good friction resistance, is now used in automotive clutch end plate, automotive brake pads and other brake devices and other friction material products, is the ideal material for ceramic friction plate.
2.Chemical Composition:

CAS	EINECS	CHEMICAL FORMULA	MOLECULAR WEIGHT
12030-97-6	234-748-6	K2O·6TiO2	174.06

3. Specification:Potassium titanate whisker; Titanate Wafer Crystal
4. Application:(Potassium titanate whisker)
 

     

Potassium Titanate Whisker Friction Parameter
SEM Appearance	Fibrous Crystal	Visual investigation, SEM
Product Appearance	White Powder	Visual investigation
Median Size (in volume distribution)	10-100µm	Laser diffraction method
Mohs Hardness	4.0	Mohs hardness test method
Bulk Density	0.2~0.3 g/cm	In-house method
P H Value	7-10	Water leaching (1g / 100g H2O)
Moisture Content	<0.5%	Loss on drying test (105ºC×1h)

5. Application:( Titanate Wafer Crystal)
 

Titanate Wafer Crystal Friction Parameter
SEM Appearance	Scaly Crystal	Visual investigation, SEM
Product Appearance	White Powder	Visual investigation
Median Size (in volume distribution)	10-20µm	Laser diffraction method
Mohs Hardness	4.0	Mohs hardness test method
Bulk Density	0.8 ~ 1.2 g/cm	In-house method
P H Value	8-11	Water leaching (1g / 100g H2O)
Moisture Content	<0.5%	Loss on drying test (105ºC×1h)

6.Potassium Titanate Whisker & Titanate Wafer Crystal Friction Performance:
(1)The friction coefficient is stable from room temperature to high temperature.
(2)Fully ensure smooth braking
(3)Low wear in the high temperature zone itself
(4)Minimize dual wear
(5)There is almost no noise when braking
7. Packaging:
Using two paper and one plastic composite bag packaging, bag mouth suture seal, 10kg/bag or 25kg/ bag, Can also according to customer requirements.
8.Industrial Safety and Environment Protection
(1)Risk of explosion by static sparks or ignition sources
(2)Use only explosion -proof equipment .
(3)Use with local exhaust ventilation.
(4)Wear protective eyeglasses or chemical safety goggles .
9.A safety data sheet will be made available on request
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
Ceramic Pads Materials: