Focus on Production Ceramic Fiber Composite Fibre Mineral Fiber Rock Wool Fiber Used for Brake Pads and Brake Lining

• Customization: Available
• Usage: Iron Voltage Electric Material, Thermal Insulation Coatings, Friction Material, Packing Material, Filter Material, High Temperature Insulating Material
• Temprature Classification: 1900℃, 1600℃, 1500℃
• Model NO.: CF-1010, CF-1020, CF-1025, CF-1035 CMF-1040
• Shape: Particles
• Manufacturing Technique: Chop
• Kind: High Ahlmirla Fibre
• The Average Fiber Length: 0.15--2.5mm
• The Average Fiber Diameter: 4-9um
• Color: White or Greyish White
• Softening Point: >1750temperature
• pH: 7
• Shot Content;>120mesh: <20
• Fiber Diameter: 2-4um
• Specific Gravity: 0.25-0.45G/M3
• Fiber Moisture: <0.1
• Transport Package: PP and Paper Bags on Pallets
• Specification: CF-1010, CF-1020, CF-1025, CF-1035
• Trademark: Deyoute
• Origin: Hebei, China
• HS Code: 680690000
• Production Capacity: 2000

Product Description

Ceramic fiber(CF-1010 ,CF-1020,CF-1025,CF-1035)
  Aluminum silicate fiber, raw materials to kaolin, coke gem, pyrophyllite and other high aluminum content of silicate ore as raw materials, silicon dioxide and alumina content is more than 96%.
Chemical composition :

SiO2	Al2O3	Fe2O3	Na2O+K2O
45%-55%	40-50%	0.8%-1.0%	0.2%-0.5%

Characteristics and applications:
It has low heat conductivity, thermal stability, chemical stability, and no causticity. Brake linings made from ceramic fiber have high temperature resistance and decentrality, can be used in brake linings which requires high temperature resistance and heat recovery capacity, it also can be used in all types if mixer
Recommendatory dosage:
Brake drum: 20-35%
Brake disc: 10-25%
Technology Indicators:
  CERAMIC FIBER(CF-1025):

Project	Index(%)
The average fiber length	0.15--2.5mm
The average fiber diameter	4-9um
Fiber distribution	D50
Specific Gravity	0.25-0.45g/m3
Fiber moisture	≤1.0
Fiber diameter	2-4um
Fiber loss-on-ignition	<0.5,(800/H)
Softening Point	>1750Temperature
PH	7
Fiber Asbestos Content	0
Shot Content;>120mesh	<20
Surface density(state of compression)	0.13-0.20g/ cm³

 Ceramic Fiber(CF-1010)

Project	Index(%)
The average fiber length	0--1mm
The average fiber diameter	4-9um
Fiber distribution	D50
Specific Gravity	0.45-0.55g/m3
Fiber moisture	≤1.5
Fiber diameter	2-4um
Fiber loss-on-ignition	<0.5,(800/H)
Softening Point	>1750Temperature
PH	7
Fiber Asbestos Content	0
Shot Content;>120mesh	<30
Surface density(state of compression)	0.25-0.40g/ cm³

Ceramic Fiber(CF-1020)

Project	Index(%)
The average fiber length	0.10--2.0mm
The average fiber diameter	4-9um
Fiber distribution	D50
Specific Gravity	0.25-0.35g/m3
Fiber moisture	≤1.0
Fiber diameter	2-4um
Fiber loss-on-ignition	<0.5,(800/H)
Softening Point	>1750Temperature
PH	7
Fiber Asbestos Content	0
Shot Content;>120mesh	<25
Surface density(state of compression)	0.25-0.35g/ cm³

Package:
     25kg*40nos packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .

 

Storage:
Ceramic Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.
Industrial Safety and Environment Protection:

1.  Risk of explosion by static sparks or ignition sources
2.  Use only explosion -proof equipment .
3.  Use with local exhaust ventilation.
4. Wear protective eyeglasses or chemical safety goggles .

A safety data sheet will be made available on request:
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.

Composite fibre:
Non-Asbestos Composite Mineral Synthetic Fibre(Composite Fiber)

Product Model: CF-1035,CF-1025

The fiber is made of mineral fiber, organic fiber and surface treatment agent. Length 1.0-3.5mm, the fiber has good dispersion, suitable for mixing with all kinds of mixer. Using this product cold type effect is good, especially suitable for cold type two step brake lining production process, use this product do not need to add organic fiber.

Technical Indicators:

Project	Indicators
Specific Gravity	2.25g/cm³
Fiber length	1.0-3.5mm
Loose density	800-1100 cm³/100g
105ºC Volatiles	<2.5%
Slag ball Content	>120mesh; < 2%
800ºC Burn loss	28-32%
Fiber diameter	3-8μm
P H	8-10
Main ingredients	Mineral Fiber 70% Cellulose Fiber 30%

Package:
     25kg*40nos packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .
Storage:
Mineral Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.
Industrial Safety and Environment Protection:

1.  Risk of explosion by static sparks or ignition sources
2.  Use only explosion -proof equipment .
3.  Use with local exhaust ventilation.
4. Wear protective eyeglasses or chemical safety goggles .

A safety data sheet will be made available on request:
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.