Technical Information Sheet
- General
Glass Fiber products we manufactured are ideal material which can be in friction materials,asphalt product and others.
2. Properties
| Chopped length |
Type Of Glass |
Choppability |
Loss On Lgnition |
Compatibility Resin |
Specification |
| 3.0mm |
E-Glass |
> 98% |
0.55 |
PA66 And PA6 |
B Grade |
| Filament Dia.(μm) |
Moisture Content(%) |
Loss On lgnition(%) |
Chopped Length (mm) |
| ISO 1888-2006 |
ISO 3344-1997 |
ISO 1887-1995 |
Q/JS J0361-2010 |
| ±10 |
≤0.1 |
0.5±0.15 |
±1.0 |
3.Application
FiberGlass GF-3MMchopped strand is in the line chopped, it's suitable for reinforcing thermoplastics;This chopped glass fiber has good fluidity, bundle ability, and small linear density, so there is no pilling and fluffing in mixing, and can be fully mixed with thermoplastic resin. It is widely used to reinforce PA, PP, PVC, ABAS, PC, etc. Fiberglass chopped strands also can be used in construction and industry, such as reinforced concrete, mortar, cement, gypsum board, plasterboard, manhole cover, brake pad, etc. Fiberglass chopped strands give superior mechanical property and apparent condition.
4. Package
25kg*40nos packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .
5. Storage
Glass Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.
6. Industrial Safety and Environment Protection
- Risk of explosion by static sparks or ignition sources
- Use only explosion -proof equipment .
- Use with local exhaust ventilation.
- Wear protective eyeglasses or chemical safety goggles
- A safety data sheet will be made available on request
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
Steel wool Fiber is a new type of metal fiber material, the fiber is up to 4μm, the natural state of similar to fluffy cotton. Crushed steel wool mainly used for brake pads and other friction materials.
2. Chemical Composition:
| C |
Si |
Mn |
S |
P |
| 0.07-0.12 |
0.07MAX |
0.8-1.25 |
0.03MAX |
0.03MAX |
3. Specification:D0-160, D1-80, AD1-80, 1-80, 3L-80, 3-60, Q4-80
4. Application:
| Classification |
Specification |
Range Of Application |
Note |
| Steel wool Fiber |
D0-160
D1-80 |
Brake shoes for motorcycle, car and light truck |
It can be produced according to the standards and specifications required by users |
AD1-80
1-80 |
Brake shoes for a midsize car |
3L-80
3-60
Q4-80 |
Brake shoes for heavy duty vehicles |
Crushed steel wool: mainly used for automotive brake pads and other friction materials;
Cut steel cotton fiber: can be used in construction concrete and other fields;
Steel wool long fiber: mainly used for civilian daily washing and industrial rust removal, decontamination, polishing, etc. Steel wool can also be used in powder metallurgy, refractory materials, conductive plastic products and other fields.
5. Packaging:
Using two paper and one plastic composite bag packaging, bag mouth suture seal, 25kg/ bag, can also according to customer requirements.
){kind=link}