Focus on Sepiolite Fiber Making for Friction Material Brak Pad

• Customization: Available
• Shape: Fiber
• Dry Powder Density: ≤360kg/M3
• Model NO.: 200mesh, 325mesh, 20mesh, SF-1040, SF-2040, SF-20M
• Sio2: 58.73 %
• MGO: 26.26 %
• Compression Strength: >300kpa
• Cohesional Strength: >50kpa
• Thermal Conductivity: <0.051W/M.K
• pH: 7-8
• Transport Package: PP Paper Bags on Pallets
• Specification: SF-1030, SF-1040, SF-2040, SF-20M
• Trademark: Deyoute
• Origin: Hebei, China
• HS Code: 2530909999
• Production Capacity: 6500

Product Description

Technical Information Sheet

1. General

     Sepiolite Fiber  has good adsorption, decolorization, thermal stability, corrosion
resistance, radiation resistance, heat insulation insulation, friction resistance, permeability and
other properties
       Size:325Mesh,200mesh,20mesh,1-3mm,1-4mm,2-4mm,1-7mm,2-8mm,1-10mm

 

      2. Properties

Chemical Formula:		Mg4Si6O15(OH)2·6(H2O)
Composition:		Molecular Weight = 613.82 gm
Magnesium Mg	15.84 %	MgO	26.26 %
Silicon Si	27.45 %	( SiO2)	58.73 %
Hydrogen  H	1.97 %	(H2O)	17.61 %
Oxygen O	54.74 %	P H Value	7-8
Fiber length:	1-3mm	Compression strength	>300kPa
Dry Powder Density:	≤360kg/m3	Cohesional Strength	≥50kpa
Thermal Conductivity	≤0.051w/m.k	Asbestos Content	0

 

3. Application

    Sepiolite Fiber  for making friction materials,drilling, petroleum, medicine, brewing, building materials, pesticides, fertilizers, rubber products, and other aspects. Brake linings made from our fiber products have many notable features such as stably ,high temperature properties,little abrasion,low(no)noise and long life.when we add in<2% of above fiber into asphalt materials,it will produce multi performance properties including prevent "drain down "problem,improve internal reinforcement &crack resistance ,cost effect replacement for asbestos fiber and others.

4.Package
     25kg*40tons packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .

 

 

5.Storage

 Sepiolite Fiber  must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.

1. Industrial Safety and Environment Protection

1.  Risk of explosion by static sparks or ignition sources
2.  Use only explosion -proof equipment .
3.  Use with local exhaust ventilation.
4.  Wear protective eyeglasses or chemical safety goggles .

1. A safety data sheet will be made available on request

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale